Fork Mounted Crane Jib Manufacturer in Saudi Arabia
A Fork Mounted Crane Jib is a steel attachment that slides directly onto a forklift’s forks, instantly converting the forklift into a mobile crane capable of suspended-load lifting — a practical solution for sites where a dedicated crane isn’t available or justified for occasional lifting tasks.
Century Experts fabricates Fork Mounted Crane Jibs from high-strength structural steel, welded by qualified personnel under approved procedures, with a hook mounted at the jib’s extended end and a secure fork engagement channel that locks onto the forklift’s carriage. This allows loads to be lifted, swung, and positioned using standard rigging (slings, chains, or shackles) attached to the jib hook, rather than the forks themselves.
We manufacture both standard and custom-built Fork Mounted Crane Jibs with various reach lengths, capacities, and fork engagement widths to suit different forklift models and site requirements. Engineering calculations, inspection, proof load testing, and third-party certification can be provided upon request.
We proudly supply Fork Mounted Crane Jibs throughout Riyadh, Jeddah, Dammam, Jubail, Al Khobar, Yanbu, Makkah, Madinah, Qassim, Al Kharj, NEOM, and across Saudi Arabia.
Applications
Our Fork Mounted Crane Jibs are suitable for:
- Warehouse and Factory Suspended Load Lifting
- Machinery and Motor Installation
- Loading and Unloading of Suspended Cargo
- Workshop Engine and Component Lifting
- Occasional or Low-Frequency Crane Lifting Tasks
- Site Areas Without Access for a Mobile Crane
- Equipment Positioning in Confined Spaces
- Pipe and Duct Section Handling
- Generator and Pump Installation
- Maintenance and Shutdown Lifting Tasks
- Container Loading Yards
- General Industrial Suspended Lifting Requirements
Features
- Heavy-duty structural steel construction
- Fork engagement channel sized to standard forklift fork spacing
- Extended jib arm with hook at the working end
- Locking pin or strap to secure the jib onto the forks
- Engineered load chart based on reach and forklift capacity
- Smooth weld finish
- Powder-coated or industrial paint finish
- Custom reach lengths and capacities available
- Identification plate with rated capacity and serial number
- Suitable for indoor and outdoor industrial environments
Why Choose Century Experts
- Custom-designed fabrication solutions
- Experienced engineering and fabrication team
- High-quality workmanship
- Qualified welding procedures
- Engineering calculations available
- Proof load testing available
- Third-party inspection support
- Fast manufacturing and delivery
- Complete documentation package
- Supply across all regions of Saudi Arabia
Standards & Compliance
Our Fork Mounted Crane Jibs are designed and manufactured in accordance with applicable project requirements and internationally recognized standards, including:
- ASME B56.1 – Safety Standard for Low Lift and High Lift Trucks (Forklift Attachments)
- ASME B30.20 – Below-the-Hook Lifting Devices
- OSHA 29 CFR 1910.178 – Powered Industrial Trucks
- Third-party inspection requirements (upon client request)
- Client specifications and project requirements
Compliance is subject to the approved design, client specifications, applicable project requirements, and relevant regulatory standards.
Frequently Asked Questions (FAQ)
1. What is a Fork Mounted Crane Jib?
A Fork Mounted Crane Jib is a steel attachment that slides onto a forklift’s forks and provides a hook at its extended end, allowing the forklift to lift suspended loads using slings or chains, effectively functioning as a mobile crane.
2. Does using a jib reduce the forklift’s rated lifting capacity?
Yes. Because the jib extends the load’s effective distance from the forklift’s front axle, the safe working load is lower than the forklift’s standard fork-mounted capacity, and is calculated based on the jib’s reach length and the forklift’s specific load chart.
3. Will the jib fit any forklift?
Fork engagement channels are sized to common fork spacing dimensions, but since fork thickness and spacing vary between forklift models, we recommend confirming your forklift’s fork dimensions so the jib fits securely without excessive movement.
4. How is the jib secured to the forks to prevent it sliding off?
The jib includes a locking pin, safety strap, or clamping mechanism that secures it onto the fork carriage once engaged, preventing the jib from sliding forward or off the forks during lifting and travel.
5. What reach lengths are available?
We manufacture jibs in a range of standard reach lengths, with capacity decreasing as reach increases, and custom lengths can be engineered to match specific lifting tasks and clearance requirements on site.
6. Can the jib swing or rotate the load?
Standard jibs are fixed in position relative to the forks, meaning load positioning is achieved by maneuvering the forklift itself. Rotating or swiveling hook options can be incorporated into custom designs where finer load positioning is required.
7. What standards does your Fork Mounted Crane Jib comply with?
Our Fork Mounted Crane Jibs can be designed and manufactured in accordance with ASME B56.1, ASME B30.20, OSHA 29 CFR 1910.178, and project-specific client requirements.
8. Is testing and certification available for the jib?
Yes. We provide proof load testing, third-party inspection through approved agencies, and a Certificate of Conformity for every Fork Mounted Crane Jib, along with an identification plate showing rated capacity at stated reach lengths and serial number.
9. Can the jib be customized for our forklift and lifting tasks?
Yes. We fabricate Fork Mounted Crane Jibs to custom reach length, fork engagement width, capacity, and finish, based on the forklift model and typical loads handled at your site.
