Fixed H Lifting Beam Manufacturer in Saudi Arabia
Century Experts is a trusted manufacturer and supplier of Fixed H Lifting Beams, engineered to provide a stable, single-point lifting solution for long, wide, or evenly distributed loads using a crane, spreader, or overhead lifting system across Saudi Arabia.
Our Fixed H Lifting Beams are fabricated from high-quality structural steel (typically H-beam or I-beam section) by qualified welders using approved fabrication procedures. The fixed lifting point configuration keeps the load level and reduces sling angle stress compared to direct multi-sling lifting, making it ideal for repetitive, defined lifting operations.
We manufacture both standard and custom-built Fixed H Lifting Beams with various lengths, capacities, and lifting point arrangements to suit specific load dimensions and site requirements. Engineering calculations, inspection, proof load testing, and third-party certification can be provided upon request.
We proudly supply Fixed H Lifting Beams throughout Riyadh, Jeddah, Dammam, Jubail, Al Khobar, Yanbu, Makkah, Madinah, Qassim, Al Kharj, NEOM, and across Saudi Arabia.
Applications
Our Fixed H Lifting Beams are suitable for:
- Structural Steel Member Lifting
- Pipe and Pipe Spool Handling
- Precast Concrete Panel Lifting
- Machinery and Equipment Installation
- Long Load Transport in Warehouses
- Container and Skid Lifting
- Vessel and Tank Section Lifting
- Wind Turbine Component Handling
- Shipyard and Marine Fabrication Lifting
- Power Plant Equipment Installation
- Steel Erection Works
- Repetitive Production Line Lifting Operations
Features
- Heavy-duty structural steel H-beam or I-beam construction
- Fixed lifting lug positions for defined, repeatable lifts
- Single top lifting point for crane hook or shackle connection
- Multiple bottom lifting points for sling attachment
- Engineered to reduce sling angle and side loading
- Smooth weld finish
- Powder-coated or industrial paint finish
- Custom lengths and load capacities available
- Identification plate with rated capacity and serial number
- Suitable for indoor and outdoor industrial environments
Why Choose Century Experts
- Custom-designed fabrication solutions
- Experienced engineering and fabrication team
- High-quality workmanship
- Qualified welding procedures
- Engineering calculations available
- Proof load testing available
- Third-party inspection support
- Fast manufacturing and delivery
- Complete documentation package
- Supply across all regions of Saudi Arabia
Standards & Compliance
Our Fixed H Lifting Beams are designed and manufactured in accordance with applicable project requirements and internationally recognized standards, including:
- ASME B30.20 – Below-the-Hook Lifting Devices
- ASME BTH-1 – Design of Below-the-Hook Lifting Devices
- OSHA 29 CFR 1926.1413 – Wire Rope, Below-the-Hook Devices and Rigging
- DNV 2.7-1 / DNV-ST-N001 (where applicable to offshore or marine lifting)
- Third-party inspection requirements (upon client request)
- Client specifications and project requirements
Compliance is subject to the approved design, client specifications, applicable project requirements, and relevant regulatory standards.
Frequently Asked Questions (FAQ)
1. What is a Fixed H Lifting Beam?
A Fixed H Lifting Beam is a rigid structural steel beam, typically fabricated from an H-beam or I-beam section, with a single top lifting point and fixed lower attachment points for slings, used to lift long or wide loads evenly with a crane.
2. How is a lifting beam different from using slings alone?
Lifting slings connected directly to a load create sling angles that increase tension and side loading on the load and rigging. A lifting beam keeps the slings vertical below the fixed attachment points, reducing sling tension, preventing load crushing, and keeping the load level during the lift.
3. Why is it called a “fixed” lifting beam?
The term “fixed” refers to the lifting point positions on the beam being set at defined, non-adjustable locations, engineered specifically for a particular load width or lifting arrangement, as opposed to adjustable or telescopic beams that can be repositioned for different load sizes.
4. What load capacities are available?
We manufacture Fixed H Lifting Beams from light-duty capacities for general workshop use up to heavy-duty capacities for structural steel, precast, and marine lifting applications, with capacity determined by beam length, section size, and lifting point arrangement.
5. How many lifting points does the beam have?
Most Fixed H Lifting Beams have one top lifting point for the crane hook and two or more bottom lifting points for slings, though the exact number and spacing of lower points is engineered to match the specific load being lifted.
6. Can the beam be designed for a specific load width or length?
Yes. Since the lifting points are fixed rather than adjustable, we engineer the beam length and lifting point spacing to match the exact dimensions of the load it is intended to lift, based on drawings or measurements provided by the client.
7. What standards does your Fixed H Lifting Beam comply with?
Our Fixed H Lifting Beams can be designed and manufactured in accordance with ASME B30.20, ASME BTH-1, OSHA 29 CFR 1926.1413, and project-specific client requirements.
8. Is testing and certification available for the lifting beam?
Yes. We provide proof load testing, third-party inspection through approved agencies, and a Certificate of Conformity for every Fixed H Lifting Beam, along with an identification plate showing rated capacity, beam dimensions, and serial number.
9. Can the beam be customized for our specific lifting application?
Yes. We fabricate Fixed H Lifting Beams to custom length, section size, lifting point spacing, and finish, based on the load dimensions, weight, and lifting method used at your site.
